websitelogo_transparency.png

  • Increase font size
  • Default font size
  • Decrease font size
Home CCNA 3 Packet Tracer CCNA 3 Final

Packet Tracer CCNA 3 Final

E-mail Print

CCNA 3 Final PT Overview 

I created a Packet Tracer activity for a CCNA 3 class final. I hope this Packet Tracer final exercise will help prepare you for your CCNA 3: VLAN and Switching final, as well as any cumulative lab simulation involving switching and VLANs. The packet tracer involves VLANs, VTP, STP, Inter-VLAN routing, port security and wireless. The instructions for the lab final are included in the Packet Tracer file. You can download it here: CCNA3-dansFinal.zip

 

Cisco IOS Commands

You need to know the following commands for my Packet Tracer CCNA 3 final (see below). The commands below use sample data only, you will need to fill in your own specific names and numbers based on the requirements of the lab.

switch# show running-config
switch# show vlan
switch# show vtp status
switch# show spanning-tree
switch# configure terminal
switch(config)# line console 0
switch(config-line)# password cisco
switch(config-line)# login
switch(config)# line vty 0 15
switch(config-line)# password cisco
switch(config-line)# login
switch(config)# enable secret class
switch(config)# vlan 5
switch(config-vlan)# name danscourses-vlan
switch(config)# vtp mode server
switch(config)# vtp mode client
switch(config)# vtp domain dansvtpdomain
switch(config)# vtp password danspass
switch(config)# spanning-tree vlan 1-1005 priority 4096
switch(config)# int vlan 99
switch(config-if)# ip address 192.168.99.2 255.255.255.0
switch(config)# ip default-gateway 192.168.99.1
switch(config)# int range fa0/1-3
switch(config-if-range)# switchport mode trunk
switch(config-if-range)# switchport trunk allowed vlan 1-50

switch(config-if-range)# switchport trunk native vlan 22
switch(config)# int fa0/10
switch(config-if)# switchport mode access
switch(config-if)# switchport access vlan 10
switch(config-if)# switchport port-security
switch(config-if)# switchport port-security maximum 3
switch(config-if)# switchport port-security violation shutdown
switch(config-if)# switchport port-security mac-address sticky
switch# copy run start

router# show running-config
router# show ip route
router# configure terminal
router(config)# line console 0
router(config-line)# password cisco
router(config-line)# login
router(config)# line vty 0 4
router(config-line)# password cisco
router(config-line)# login
router(config)# enable secret class 
router(config)# int fa0/0
router(config-if)# no shutdown
router(config)# int fa0/0.5
router(config-subif)# encapsulation dot1q 5
router(config-subif)# ip address 192.168.5.1 255.255.255.0
router(config)# int fa0/0.44
router(config-subif)# encapsulation dot1q 44 native
router(config-subif)# ip address 192.168.44.1 255.255.255.0
router# copy run start

Last Updated on Wednesday, 11 September 2013 11:21